Metal & Aluminum Siding Refinishing
Metal and aluminum siding is a great choice for many residences because it is inexpensive, waterproof and virtually maintenance-free. However, it is not immune to wear and tear caused by the elements. Over time, the siding can become dull, discolored, or scratched. Refinishing metal and aluminum siding can help restore its appearance and protect it from further damage.
To refinish metal and aluminum siding, start by removing any dirt or debris with a pressure washer. After that, put on rubber gloves, goggles and a breathing mask. Next, apply a cleaning solution, such as Jomax, to the siding with a garden sprayer, and allow it to sit for 10-15 minutes before rinsing it off. Once the siding is clean and dry, use a wire brush, sandpaper or a powered sander to remove any remaining rust, chips or other imperfections.
After all the debris is gone, apply a coat of paint or roll on a primer specifically designed for metal siding. Choose a rust-proof paint made with a high-quality latex-based binder and a rust-inhibiting component. Apply a second coat of paint after the first has dried completely. For best results, use a brush with soft bristles and long strokes that overlap slightly.
After the paint or primer is applied and dried, you can use a sealer to protect the siding and make it shine. There are several types of sealants available, but we recommend a clear acrylic fungicidal sealant, which is specifically designed for metal siding. It is more durable than other sealants and will protect the siding from rust, mildew, and other damage. Once the sealant is dry, you can enjoy the fresh, new look of your metal or aluminum siding.
Refinishing metal and aluminum siding can be a long, tedious task, but it is worth it in the end. A fresh coat of paint and sealant will protect the siding from further damage and make it look great for years to come. So, if your siding is looking dull or worn-out, don’t hesitate to give it a facelift.
How do you refinish aluminum siding?
6 steps to painting aluminum siding Step 1: Prep the siding. Scrape off any peeling paint with a paint scraping tool, Step 2: Apply the first coat of primer, Step 3: Apply a second coat of primer, Step 4: Paint the aluminum siding, Step 5: Apply a second coat of paint, Step 6: Inspect your work .
Is painting aluminum siding a good idea?
Your aluminum siding will need to be painted again in a few years to maintain it. Painting is recommended every 4-6 years depending climate and wear and tear. Though painting may seem cost effective, having to repaint over and over really adds up. In the long-run, it’ll cost more than installing new vinyl siding.
Metal and aluminum siding refinishing is an affordable way to improve the value and appearance of your home. Over time, siding can become weathered and worn, making it look faded and dull. Refinishing your siding can bring it back to its original luster, protecting it from further wear and tear caused by the elements.
Before you begin refinishing your siding, you should prepare the surface by cleaning it thoroughly. Remove all grime and dirt, and also repair any damage that has occurred over time. After the surface has been properly prepared, it’s time to start the refinishing process.
Depending on the type of metal or aluminum siding on your home, the refinishing process may vary. If you’re refinishing metal siding, you should use a metal paint suitable for exterior surfaces. When you’re finished painting, you may want to apply a sealant or coat of varnish to protect the metal siding from further damage.
Aluminum siding refinishing is slightly different. You’ll need to use a special type of paint that is designed specifically for aluminum siding. Many manufacturers require you to use their brand of paint, as an improper choice could damage the siding or fail to adhere properly. Additionally, some recommend a primer or sealant be applied before the paint is applied to increase the longevity of the refinishing process.
When refinishing metal or aluminum siding, it is important to be careful not to drip or have excess paint accumulate in certain areas. These drips can not only be unsightly but can also affect the longevity of the refinish job. Be sure to paint in a well-ventilated area and allow the siding plenty of time to dry before applying a second coat of paint if necessary.
Metal and aluminum siding refinishing is something anyone can do with a few simple tools and supplies. Not only will it enhance the overall value and appearance of your home, it’s also an affordable and easy way to give it a new lease on life.
How do you make old aluminum siding look new?
Once the siding is clean, use paint that is especially made for metal. There are DTM (Direct to Metal) paints available…. Restore the Original Color and Finish of Your Metal Siding with Everbrite™, Less Mess than painting, Easier than painting siding, Less Expensive than painting, Lasts much longer than repainting . Repainting aluminum siding can be time consuming and expensive, and the paint will only last a few years before it needs to be redone. Everbrite Protective Coating is an easy to apply and cost effective solution for restoring faded, chalking and dull oxidation on aluminum siding, gutters, roofs, fences, mailboxes, garage doors, boats, patio furniture and much more. It will restore the siding to its original color and appearance and will protect it from further fading and deterioration due to exposure to harsh elements such as sun, wind and rain. “Everbrite is a crystalline coating that won’t chip, crack, or peel. When applied, it actually bonds with the metal on a molecular level. It forms a watertight, protective barrier against the elements, including UV light exposure, salt, dirt and dust.” No painting is necessary. Everbrite can be applied with a brush, roller, or paint sprayer. A sealant should always be applied before the Everbrite to help protect the siding from moisture and other environmental factors.
Metal and aluminum siding refinishing can be an effective way to restore the beauty of your home’s exterior. Refinishing these materials adds visual interest and helps maintain your home’s curb appeal for years to come. Whether you’re looking to update a decades-old siding or simply freshen up its existing look, the process is relatively straightforward and can be completed in a short amount of time.
Before you begin, it’s important to assess the condition of your metal or aluminum siding. If it’s in good condition, you may be able to get away with simply repainting or power-washing it. If, however, it’s suffering from corrosion, peeling, or other signs of wear and tear, you’ll need to sand it down before you move on to the refinishing stage. At this point, you may also wish to replace any damaged or missing pieces before going ahead with the refinishing.
Once your metal or aluminum siding is ready to go, you’ll want to start the refinishing process. This will involve cleaning the surface thoroughly to remove any dirt, debris, or other contaminants. Then you’ll need to apply a coat of primer and let it dry completely. Once the primer is dry, you can begin to apply the actual refinishing coats. This should involve either matching or complementary paint colors that help to enhance the look of your metal or aluminum siding. Be sure to apply multiple coats to ensure adequate protection and complete coverage, and allow each coat to dry before moving on to the next one.
As part of the refinishing process, you should also take the time to inspect the caulking around each piece of the metal or aluminum siding. If the caulking is worn or cracked in any way, it’s important to replace or repair it to ensure a watertight seal and optimal home protection.
Metal and aluminum siding refinishing can be a great way to freshen up the exterior of your home, as long as it’s properly prepped, painted, and maintained. Don’t forget to monitor the condition of your siding over time with regular inspections and maintenance to ensure it stays looking its best.